Product ID:SCOTCH-SEAL BRAND INDUSTRIAL SEALANT 612
MSDS Date:08/07/1992
FSC:8030
NIIN:00-275-8114
MSDS Number: BDSHM

3M COMPANY, ADHESIVES,COATINGS & SEALERS

3M CENTER
ST. PAUL, MN 55144-1000

Emergency Phone: (612)733-1110

Info Phone: (612)733-1110

Cage: 04963

MINNESOTA MINING AND MFG CO, DBA 3M

SAINT PAUL, MN 55144-1000 US

Telephone: 866-556 5712 / 612-733-1110

Cage: 76381

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 30-40%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3; 9192

ZINC OXIDE

CAS: 1314-13-2

RTECS: ZH4810000

Fraction By Weight: 1-10%

OSHA PEL 15MG/M3 TDUST/5 FUME

ACGIH TLV: 10MG/M3 TDUST; 9293

THIAZOLE PEPTIZING AGENT

Fraction By Weight: 1-10%

OSHA PEL N/K

ACGIH TLV: N/K

POLYSULFIDE RUBBER

Fraction By Weight: 50-60%

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:N/K
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE:MAY CAUSE IRRITATION ON DIRECT
CONTACT. SKIN:MAY CAUSE IRRITATION. INHALATION:NO ADVERSE HEALTH
EFFECTS ARE EXPECTED. INGESTION:MAY CAUSE DIGESTIVE SYSTEM
IRRITATION.
Explanation of Carcinogenicity:NOT APPLICABLE
Effects of Overexposure:SEE HEALTH HAZARD DATA
Medical Cond Aggravated by Exposure:N/K

First Aid:EYE:IMME FLUSH W/LGE AMTS OF WTR FOR AT LEAST 15 MIN .CALL A
PHYSICIAN. SKIN:WASH AFFECTED AREA W/SOAP & WTR. INHALATION:REMOVE
FROM EXPOSURE. SUPPORT BREATHING (GIVE O*2/ARTIFICIAL RESPIRATION)
. INGESTION:CALL MD IMMEDIATELY.

Extinguishing Media:CO*2, FOAM, DRY CHEMCIAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:NOT APPLICABLE (SOLID)
Neutralizing Agent:N/K

Handling and Storage Precautions:AVOID EYE & PRLONGD SKIN CONTACT,WEAR
SAFETY GLASSES & IMPERVIOUS GLOVES WHN HNDLNG PRODUCT.DO NOT TAKE
INTERNALLY.KEEP OUT OF REACH OF CHILDREN.
Other Precautions:AVOID EYE & PROLONGED SKIN CONTACT.

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:MECHANICAL VENTILATION RECOMMENDED, TO KEEP BELOW TLV.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:N/K
Work Hygienic Practices:N/K
Supplemental Safety and Health
RTE ENTRY:

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Density:N/APPLICAB
Spec Gravity:1.46 (H*2O=1)
pH:N/APPL
Solubility in Water:VERY SLIGHT
Appearance and Odor:BLACK PUTTY, STRONG SULFIDE ODOR
Percent Volatiles by Volume:0
Corrosion Rate:

Stability Indicator/Materials to Avoid:YES
N/APPLICABLE.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CO, CO*2, SO*2 & SMOKE PARTICLES WHEN
EXPOS TO HEAT OR FLAME

Waste Disposal Methods:NOT A HAZARDOUS WASTE (E.P.A). MAY BE PLACED IN
A SANITARY LANDFILL IF LOCAL REGULATIONS PERMIT. DISPOSE OF IN
ACCORDANCE W/LOCAL,STATE & FEDERAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.